Panasonic KX-NCP1000 - Page 299

→SMDR
→SMDR Options
→RS-232C
PT Programming Manual References
[800] RS-232C Parameter—New Line Code
[800] RS-232C Parameter
—Baud Rate
[800] RS-232C Parameter—Word Length
[800] RS-232C Parameter—Parity Bit
[800] RS-232C Parameter—Stop Bit Length
[802] SMDR Page Length
[803] SMDR Skip Perforation
[804] SMDR Outgoing Call Printing
[805] SMDR Incoming Call Printing
Feature Guide References
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
1.2.2.7 Log-in/Log-out
1.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.12.1 Call Transfer
1.17.6 Direct Inward System Access (DISA)
1.30.1 TIE Line Service
2.2.1 Class of Service (COS)
3.1 Capacity of System Resources
Feature Guide 299
1.26.1 Record Log Features