EasyManua.ls Logo

Panasonic KX-NCP1000 - Page 346

Panasonic KX-NCP1000
468 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• To establish a QSIG network (®
1.30.4 QSIG Standard Features), each ISDN (QSIG) connection in a TIE
line network must have the port on one PBX assigned as a master port, and the port on the other PBX
assigned as a slave port. PBXs that support this feature are KX-TDE series, KX-TDA series, and
KX-NCP series PBXs.
[TIE Line Network Connection Example]
PBX-1
PBX-3
PBX-2
Extn.1000
:
Extn.1999
Extn. 2000
:
Extn. 2999
(A) Master
(B) Master
(C) Master
QSIG Network
(A) Slave
(C) Slave
(B) Slave
Extn. 3000
:
Extn. 3999
• When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a busy
tone. If required, Intercept Routing—Busy/DND can be activated.
• The Inter-digit time can be assigned for TIE line calls.
®
4.5 [2-3] Timers & Counters—Miscellaneous—
Incoming Call Inter-digit Timer—TIE
PC Programming Manual References
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
3.12 [1-1] Slot—Shelf Property - Virtual IP Gateway—DN2IP
3.33 [1-1] Slot—Port Property - BRI Port—Network Numbering Plan— Trunk Property
3.35 [1-1] Slot—Port Property - PRI Port—Network Numbering Plan— Trunk Property
3.38 [1-1] Slot—Port Property - T1 Port— Trunk Property
3.44 [1-1] Slot—Port Property - E1 Port— Trunk Property
3.47 [1-1] Slot—Port Property - EM Port— Trunk Property
4.5 [2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digit Timer—TIE
4.9 [2-6-1] Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ TIE Line Access
4.9 [2-6-1] Numbering Plan—Main—Other PBX Extension
4.12 [2-7-1] Class of Service—COS Settings—TRS— TRS Level—Day, Lunch, Break, Night
4.18
[2-9] System Options—Option 4—
Private Network—TIE Call
by Extension Numbering (Activation Key
Required)
5.1 [3-1-1] Trunk Group—TRG Settings—Main—
COS
11.1 [9-1] TIE Table
12.2 [10-2] DIL Table & Port Settings
→DIL— Trunk Property
→DIL— DIL Destination—Day, Lunch, Break, Night
→DDI / DID / TIE / MSN
12.3 [10-3] DDI / DID Table— DDI / DID Destination—Day, Lunch, Break, Night
12.7 [10-5] Miscellaneous— Intercept—Routing to Operator - No Destination (Destination is not
programmed.)
346 Feature Guide
1.30.1 TIE Line Service

Table of Contents

Other manuals for Panasonic KX-NCP1000

Related product manuals