Panasonic KX-NS500 - Programming the PBX; Easy Setup Wizard

4.1 Programming the PBX
4.1.1 Easy Setup Wizard
In the Easy Setup Wizard, you will set up the mandatory settings required for the PBX.
When
you log in to Web Maintenance Console for a PBX that is in its initialised, factory default state, the Easy
Setup Wizard for that PBX will launch automatically. You must log in using the Installer level account name
and password.
– The Installer level account name is "INSTALLER".
– The default Installer level account password is "1234".
28 Getting Started
4.1.1 Easy Setup Wizard