3.1.3 Customising the Buttons
You can customise the flexible buttons and/or programmable feature
(PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
• To enter programming mode when using a PS, refer to the documentation for your PS.
• The buttons in the table below can only be set on certain flexible buttons, as follows:
– Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
– Flexible
buttons on DSS Consoles: all buttons except CTI and Primary Directory Number
(PDN) buttons can be set.
– Programmable feature (PF) buttons: only the One-touch Dialling button can be set.
• For KX-UT series SIP phone users: You cannot customise the flexible buttons with the
following method from your phone. You can customise the flexible buttons using Web
Maintenance Console. For details, refer to "Customising the Flexible Buttons".