Customising Your Phone
• 3.1.2 Settings on the Programming Mode
—Call Waiting Tone Type Selection
If you select "Tone 1", you will hear the same tone for Call Waiting from an outside party and
an extension. If you select "Tone 2", you will hear different tones for Call Waiting from an
outside party and an extension.
Default
(Tone 1)
Special Tones
(Tone 2)
15 s
5 s
OR
• Only tone 1 is available for
KX-UT series SIP phones.
Answering Call Waiting from the Telephone Company
This is an optional telephone company service. You can receive a call waiting tone and the caller’s information.
For details, consult your telephone company.
While hearing a tone
PT/PS/KX-UT series
While hearing a tone
PT/SLT/PS
Press FLASH/RECALL
or EFA.
Enter 60.
6 0
Press TRANSFER
or Recall/hookswitch.
OR
OR
OR
(EFA)
• To return to the original party, repeat the operation.
• In this case, the FLASH/RECALL button on a proprietary telephone or
KX-UT series SIP
phone must be set to External Feature Access (EFA) mode through system programming.
Customising Your Phone
• 3.1.3 Customising the Buttons
Create or edit an External Feature Access (EFA) button.
84 User Manual
1.4.4 Answering Call Waiting
To Next Page
Loading...
Need help?
General
