Station Features and Operation (DPT/SLT)
148 User Manual
To talk to the new party by terminating the current call
To talk to the new party by holding the current call
Conditions
• BSS / OHCA / Whisper OHCA
If an extension user dials "1" while hearing a busy tone, BSS or OHCA or Whisper OHCA
may be activated at the called extension.
This is determined by the following conditions.
PT
SLT
Talk to the
new caller.
While hearing a Call Waiting tone;
Press the flashing CO
or INTERCOM.
or
Talk to the
new caller.
While hearing a Call Waiting tone;
Lift the handset.
Hang up.
(CO) INTERCOM
The current call is disconnected. The current call is disconnected.
PT
SLT
Talk to the
new caller.
Press the flashing
CO or INTERCOM.
or
Press HOLD.
While hearing the Call Waiting tone and the CO or INTERCOM indicator is flashing rapidly;
Talk to the
new caller.
While hearing a Call Waiting tone;
Lift the
handset.
Hang up.
Flash the
hookswitch.
Dial toneConfirmation tone
and dial tone
Dial 50.
HOLD
(CO) INTERCOM
5 0
The current call is placed on hold.
The current call is placed on hold.
If both the current call and new call are extension calls,
you will be connected to the new caller simply by pressing HOLD.
To Next Page
Loading...
Need help?
General
