Panasonic KX-TD1232 - Initial Settings

Station Programming
50 User Manual
2.2 Station Programming
2.2.1 Initial Settings
The original setting are shown in bold letters in the shaded boxes. Find and mark your desired
selections for programming.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
Preferred Line Assignment
– Outgoing
Which line do you prefer to
seize when you go off-hook
to make calls?
To enter the programme mode
Item Selection Programming Input
No line
An idle outside line
A pre-assigned outside line
The Intercom line
01–08 (for KX-TD816)
Outside line no.
To continue
Press STORE.
Follow programming input.
programming input
AUTO DIAL
STORE
1 1
INTERCOM
1
1
1
2
3
PT
The STORE indicator lights.
The display shows the initial
programming mode.
01–48 (for KX-TD1232)