Station Features and Operation (DPT/SLT)
User Manual 249
Conditions
• A phantom number must be assigned by System Programming before assigning the
Phantom Extension button by Station Programming or System Programming.
• If several extensions have the same phantom extension number, they will ring
simultaneously.
• A maximum of 128 phantom numbers can be assigned by System Programming.
• The Phantom button cannot be used for feature settings such as "Call Forwarding".
• It is programmable not to ring the extension when a call is received at a phantom extension
by Station Programming.
• Phantom Extension button on a DSS Console:
Allows the operator to transfer a call to a phantom extension by the Phantom Extension
button on the DSS Console.
Programming Guide References
[005] Flexible CO Button Assignment
[124] Phantom Extension Number Assignment
User Manual References
2.2.2 Flexible Button Assignment
2.2.3 Phantom Extension Ringing On/Off Set
To Next Page
Loading...
