Station Features and Operation (DPT/SLT)
User Manual 253
Conditions
• The CO button pressed to join the conversation needs to be assigned as a Single-CO (S-CO)
button.
• After the user presses the CO button, the CO indicator light of the other extension flashes
rapidly for only 5 seconds. Pressing the CO button again gives you an additional 5 seconds.
• This feature overrides "Data Line Security" and "Executive Busy Override Deny."
• When a two-party call is changed to a three-party call and vice versa, a confirmation tone
is sent to all three parties. Eliminating the tone is programmable.
Programming Guide References
[990] System Additional Information
User Manual References
2.2.2 Flexible Button Assignment
4.3.32 Conference
4.3.35 Data Line Security
4.3.44 Executive Busy Override Deny
To Next Page
Loading...
