Panasonic KX-TD1232 - Page 84

User Programming
84 User Manual
Programming
Conditions
• There is a maximum of 32 extension numbers for KX-TD816, and 128 extension numbers
for KX-TD1232. Each extension number can be two, three, or four digits, consisting of 0
through 9. The and # keys cannot be used.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• An extension number is invalid if the first or second digits do not match with the program
[100] "Flexible Numbering, (01)-(16) 1st through 16th hundred extension blocks" setting.
Display PT
Dial 003. Enter a jack number.
003
jack no.
<To end:>
Press NEXT.
NEXT
<PT Display> <PT Display>
Jack NO?→
To enter jack number 01, you can
also press NEXT.
<PT Display Example>
Press END.
END
<To continue:> [When SELECT is pressed]
Repeat these steps
Enter the extension no.
extension no.
Press STORE.
STORE
Press NEXT or
PREV or SELECT.
SELECT
PREV
NEXT
Enter the desired
jack number.
jack no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
#01-1:EXT101
003 EXT NUMBER
To select the second part (-2), press
NEXT after entering the jack number.