4.10 [2-6-2] Numbering Plan—Quick Dial
Quick Dialling
numbers are used to call extensions or outside parties, or access certain features without having
to dial their full numbers. It is possible to register Quick Dialling numbers that overlap with other registered
numbers (refer to "Automatic Rerouting of VoIP Calls to Public Trunks" in the Feature Guide).
A maximum of 80 Quick Dialling numbers can be programmed in Basic Memory, and a maximum of 4000
Quick Dialling numbers can be programmed in Expansion. To display other sets of numbers, click the
applicable tab.
For more information on flexible numbering, see "2.3.6 Flexible Numbering/Fixed Numbering" in the Feature
Guide.
Use quick dial for rerouting to public CO when TIE line does not work
Specifies whether to check if the quick dial numbering plan is compatible (does not overlap) with the main
numbering plan.
Value Range
Disable: Checks whether the quick dial numbering plan is compatible with the main numbering plan.
Enable: Does not check whether the quick dial numbering plan is compatible with the main numbering plan.
Maintenance Console Location
4.10 [2-6-2] Numbering Plan
—Quick Dial
Programming Manual References
None
Feature Guide References
1.6.1.6 Quick Dialling
1.30.2 Voice over Internet Protocol (VoIP) Network
2.3.6 Flexible Numbering/Fixed Numbering
Dial
Specifies the Quick Dialling number.
Value Range
Basic Memory: Max. 4 digits (consisting of 0–9, *, and #)
Expand 1–4000: Max. 8 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.10 [2-6-2] Numbering Plan
—Quick Dial
Programming Manual References
None
500 PC Programming Manual
4.10 [2-6-2] Numbering Plan—Quick Dial
To Next Page
Loading...
Need help?
General
Weight and Dimensions
