EasyManuals Logo

Panasonic KX-TDE200 Pc Programming Manual

Panasonic KX-TDE200
982 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #547 background imageLoading...
Page #547 background image
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Private Network—TIE Call by Extension Numbering (Optional SD Card
Required)
Enables extensions at two PBXs connected in a network (not including a VoIP network) to have the same
leading number. For example, extension 101 is registered at PBX 1, and extension 102 is registered at PBX
2. Only the Extension Number Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
11.1 [9-1] TIE Table— Leading Number
Feature Guide References
1.30.1 TIE Line Service
System Wireless—Out of Range Registration
Selects whether
the PBX can set the status of a PS to Out of Range if no signal is received from the PS for a
preset length of time. This feature must be enabled to allow PS roaming.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
4.5 [2-3] Timers & Counters—
System Wireless—PS Out of Range Timer
PC Programming Manual 547
4.18 [2-9] System Options

Table of Contents

Other manuals for Panasonic KX-TDE200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic KX-TDE200 and is the answer not in the manual?

Panasonic KX-TDE200 Specifications

General IconGeneral
LED indicatorsYes
SIP extensions128
Number of extensions256
Number of DECT cell stations32
Weight and Dimensions IconWeight and Dimensions
Weight15966.5 g
Dimensions (WxDxH)424 x 276 x 439 mm

Related product manuals