Panasonic KX-TDE200 Pc Programming Manual

10.1 [8-1] System Setting
Automatic Route
Selection (ARS) automatically selects the appropriate carrier at the time a trunk call is made,
according to the programmed settings. The user-dialled number will be checked and modified in order to
connect it to the appropriate carrier.
ARS Mode
Selects the condition to determine when to operate ARS.
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using Idle Line Access
method.
On
for
Any CO Access Operation: ARS operates when an extension user makes a call using Idle Line Access,
Trunk Access, or S-CO Line Access method.
Maintenance Console Location
10.1 [8-1] System Setting
Programming Manual References
None
Feature Guide References
1.5.5.3 Trunk Access
1.10.1 Automatic Route Selection (ARS)
Mode When Any Carrier is not programmed for the Dial
Selects what happens when the dialled number is not found in Leading Number in 10.2 [8-2] Leading
Number.
Value Range
Disconnect: the line will be disconnected.
Local Access: the dialled number will be handled by Idle Line Access method.
Maintenance Console Location
10.1 [8-1] System Setting
Programming Manual References
None
Feature Guide References
1.10.1 Automatic Route Selection (ARS)
848 PC Programming Manual
10.1 [8-1] System Setting

Panasonic KX-TDE200 Specifications

General

LED indicators	Yes
SIP extensions	128
Number of extensions	256
Number of DECT cell stations	32

Weight and Dimensions

Weight	15966.5 g
Dimensions (WxDxH)	424 x 276 x 439 mm