3 Enter the desired month and date.
MOKN
4 Set the desired time.
5 MAM/PMN: Select “AM” or “PM”.
MOKN
6 M N/M N: Select the desired alarm
tone. MSELECTN
R We recommend selecting a
different ringer tone from the one
used for outside calls.
7 MSELECTN MOFFN
R W
hen the alarm is set,
is
di
splayed.
Note:
R To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
R When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Silent mode
Si
lent mode allows you to select a
period of time during which the handset
will not ring for outside calls. This feature
is useful for time periods when you do
not want to be disturbed, for example,
while sleeping. Silent mode can be set
for each handset.
Important:
R Set the date and time beforehand
(page 18).
R We recommend turning the base unit
ringer off (page 45, 46) in addition to
turning the silent mode on.
R If you have set the alarm, the alarm
sounds even if the silent mode is
turned on.
Turning silent mode on/off
1 MME
NUN
M#N M2N M3N M8N
2 M N/M N: Select “O
n” or “Off”.
MSAVEN
R I
f you select “Off”, press MOFFN
to exit.
3 Enter the desired hour and minute
you wish to start this feature.
4 MAM/PMN: Select “AM” or “PM”.
MOKN
5 E
nter the desired hour and minute
you wish to end this feature.
6 MAM/PMN: Select “AM” or “PM”.
7 MSAVEN
MOFFN
R W
hen the silent mode is set,
is
di
splayed.
Note:
R To correct a digit, press M
N or M N
to
move the cursor to the digit, then
make the correction.
Changing the start and end time
1 MME
NUN
M#N M2N M3N M7N
50
For assistance, please visit http://www.panasonic.com/help
Programming
To Next Page
Loading...
