Error messages
Display message Cause/solution
Base no power
o
r
N
o link. Re-connect
base AC adaptor.
R The handset has lost communication with the
b
ase unit. Move closer to the base unit and try
again.
R Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
R The handset’s registration may have been
canceled. Re-register the handset (page 52).
Busy
R N
o cellular phone is registered to the base
u
nit. Register a cellular phone (page 20).
R The called unit is in use.
R Other units are in use and the system is busy.
Try again later.
R The handset you are using is too far from the
base unit. Move closer and try again.
Call phone company for
yo
ur access #
R You have not stored the voice mail access
n
umber. Store the number (page 67).
Check tel line
R T
he supplied telephone line cord has not been
c
onnected yet or not connected properly.
Check the connections (page 11).
R If you do not connect the telephone line cord
and use only cellular lines, set the cellular line
only mode (page 22).
Error!!
R R
ecording was too short. Try again.
R S
omeone is using a cellular line or headset.
Try again later.
R The phonebook copy is incomplete (page 57).
The cellular phone is disconnected from the
base unit. Make sure that other Bluetooth
devices are not connected to the cellular
phone, and try again.
Failed
R A
lthough the unit tried to connect to the
c
ellular phone or headset, the connection has
been failed.
– Someone is using a cellular line or headset.
Try again later.
– Make sure that the cellular phone or
headset is not connected to other Bluetooth
devices.
74
For assistance, please visit http://www.panasonic.com/help
Useful Information
To Next Page
Loading...
