R If your cellular phone is in silent mode
w
ith “On (with Talking CID)”
set, the unit announces caller
information even when Talking Caller
ID is turned off (page 44).
To use the handset ringer tone
in
stead of your cellular phone’s
ringer tone
Select “Off” in step 3, “Ring as cell
mode ”, page 21.
To change the handset ringer tone for a
cellular line, see page 45.
Auto connection to the
ce
llular phone
After registration, your cellular phone is
connected to the base unit. If you move
the cellular phone out of base unit
range, the cellular phone is
disconnected from the base unit. This
feature allows the base unit to try to
reconnect the cellular phone at regular
intervals when it returns within base unit
range. You can set the interval. The
default setting is “1 min”.
Important:
R When you are using a cellular line or
a Bluetooth headset, the base unit
loses its connection from other
Bluetooth devices (cellular phone or
headset). To automatically resume
the connection to cellular phones,
leave the auto connection on.
R Some cellular phones lose connection
after usage, please check the
specification of your cellular phone for
more details.
1 MMENUN
M N M6N M3N M2N
2 M
N/M N:
Select the desired setting.
3 MS
AVEN
MOFFN
Note:
R So
me cellular phone may ask you if
you accept the connection
requirement from the base unit. In that
case, select “Off” in step 2. Check
the specification of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
When you make or answer calls with
your cellular phone, we recommend
disconnecting it from the base unit,
otherwise received audio may not be
heard on your cellular phone.
You can also manually reconnect the
cellular phone to the base unit without
waiting for the auto connection feature to
resume the connection.
1 MMENUN
2 To connect/disconnect:
For CELL 1: M N M6N M2N M5N M1N
Fo
r CELL 2: M
N M6N M2N M5N M2N
R A
long beep sounds.
3 MOFFN
Cellular line only mode (If you
do
not use the landline)
If you do not use the landline, we
recommend setting the unit to the
cellular line only mode.
1 MMENUN
M N M1N M5N M7N
2 T
o
turn on:
M
N/M N:
“O
n”
MS
ELECTN
M N/M N: “Yes” MSELECTN
To turn off:
M
N/M N:
“O
ff”
MS
ELECTN
N
ote:
R Once you set this mode, you can use
the following buttons to make cellular
calls:
– for the handset, press M
N or M N
in
stead of MCELLN (page 25).
22
For assistance, please visit http://www.panasonic.com/help
Link to Cell
To Next Page
Loading...
