– for the base unit, press M N
in
stead of the line button (MCELL 1N
or MCELL 2N) set for the cellular line
selection (page 23, 31).
R Once you set this mode, the following
features cannot be used:
– Landline features (page 42, 46)
– Answering system (page 60).
Messages cannot be received.
However, you can only record voice
memo messages (page 63).
– Voice mail features (page 67).
R After this mode is turned on or off, the
base unit reboots.
– Bluetooth connections from cellular
phones or headset are
disconnected. If the auto
connection is turned on (page 22),
the cellular phones are
reconnected.
–
will be displayed on the handset
mo
mentarily. The handset can be
used once
is displayed.
When you use the landline again
Be
fore connecting the telephone line to
the base unit, select “Off” in step 2,
“Cellular line only mode (If you do not
use the landline) ”, page 22.
Cellular line selection
Th
is feature determines which cellular
line is selected to make cellular calls
when:
– you press MCELLN on the handset.
– you press M
N or M N on the
h
andset while the cellular line only
mode is turned on.
– you press M
N on the base unit while
t
he cellular line only mode is turned
on.
The following settings are available:
– “Manual” (handset only: default):
You can select the desired cellular
line when making a call.
– “Cellular phone 1” (base unit default):
CE
LL 1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
1 MMENUN
2 For handset: M
N M6N M3N M4N
Fo
r base unit: M
N M N M6N M3N M4N
3 M
N/M N: Select the desired setting.
4 MS
AVEN
MOFFN
Storing your area code (for
di
aling only a 7-digit phone
number to make a local call)
You need to add your area code when
making cellular calls to a phone number
in your area. Once you store your area
code, it is automatically added to the
beginning of the 7-digit phone number
when making cellular calls.
1 MMENUN
M N M6N M3N M3N
2 En
ter the 3-digit area code.
R To correct a digit, press MCLEARN.
3 MSAVEN
MOFFN
Changing the Bluetooth PIN
(P
ersonal Identification
Number)
The PIN is used to register cellular
phones to the base unit. The default PIN
is “0000”. To prevent unauthorized
access to this product, we recommend
that you change the PIN, and keep it
confidential.
Important:
R Please make note of your new PIN.
The unit does not reveal the PIN to
you. If you forget your PIN, see
page 82.
1 MMENUN
M N M6N M1N M9N
2 En
ter the new 4-digit PIN.
MOKN
3 E
nter the new 4-digit PIN again.
MSAVEN
F
or assistance, please visit http://www.panasonic.com/help
23
Link to Cell
To Next Page
Loading...
