Panasonic KX-UT133

Rejecting specific calls
You can set the unit to reject specific phone numbers.
Note
• Rejected phone numbers will not be stored in
the incoming or missed call log.
Adding a phone number
You can store a maximum of 30 phone numbers you
want to reject in the rejection list of the unit.
1. In stand-by mode, press
Setting
.
2. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
3. Press
Add
.
4. Enter the telephone number (max. 32 digits), and
then press [ENTER].
Note
• To register additional telephone numbers,
repeat the procedure from step 3.
Adding a phone number from the incoming or
missed call log
You can add a phone number by referring to the
incoming or missed call log.
1. In stand-by mode, press
Call Log
.
2. Press [ ] or [ ] to select "Incoming Call Log"
or "Missed Call", and then press [ENTER].
3. Press [ ] or [ ] to select the entry with the phone
number you want to reject.
4. Press
Save
.
5. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
6. Press [
] or [ ] to select "Yes", and then press
[ENTER].
Note
• If you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
Editing a stored phone number
1. In stand-by mode, press
Setting
.
2. Press [
] or [ ] to select "Call Block", and then
press [ENTER].
3. Press [
] or [ ] to select the phone number you
want to edit, and then press
Edit
.
4. Edit the phone number as necessary, and then
press [ENTER].
Note
• If
you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
Deleting a stored phone number
1. In stand-by mode, press
Setting
.
2. Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
3. Press [ ] or [ ] to select the phone number you
want to delete, and then press
Delete
.
4. Press [ ] or [ ] to select "Yes", and then press
[ENTER].
Note
• If
you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
32 Operating Instructions Document Version 2013-03
Feature Operations