If these settings are configured using Web User Interface Programming, this item is not displayed.
*6
This item cannot contain any of the following:
" & : < > space.
Network Test
Setting Description Value Range Default
Network Test Confirm whether other network
devices (e.g., SIP server, routers,
switching hubs) respond to network
requests. When you select this item,
enter the IP address of the device to
which you want to test the
connection.
If a device does not respond, first
check
the unit's network settings, and
then check the device's network
settings and connection.
xxx.xxx.xxx.xxx —
Restart
Setting Description Value Range Default
Restart Restart the unit (Page 80). — —
Firmware version
Setting Description Value Range Default
Firmware version View the version of the currently
installed
firmware. If a newer version
is available, its version is also
displayed. In this case, press
to update the firmware.
— —
Note
• Your phone system dealer may offer new features or an improved version of the unit's software from
time
to time. If you set the unit software update setting to manual mode through the Web user interface,
you need to download the update when "Update version. Press OK." is displayed. Contact your
administrator or dealer for further information.
52 Operating Instructions Document Version 2013-03
Customising the Telephone
To Next Page
Loading...
