Error Messages
During operation, error messages might appear on the unit. The following table lists these messages and
possible causes and solutions.
Message Possible Cause & Solution Reference
IP address collision
• The unit’s network settings are incorrect.
→ Consult your system administrator or dealer.
—
Illegal IP address
Invalid IP address
Check LAN cable.
• The LAN cable is not connected.
→ Check all connections.
Page 67
Memory Full
• A new entry for the phonebook or call block list cannot be
stored because the phonebook or call block list is full.
→ Delete unneeded entries.
Page 41
No Entries
• The phonebook or call block list contains no entries.
→ Store entries in the phonebook or call block list.
Page 40
Page 32
Please wait…
• The unit is still starting up.
→ If you have a lot of entries in the phonebook list, the unit
may take a while to start up. This is normal.
—
Document Version 2013-03 Operating Instructions 87
Appendix
To Next Page
Loading...
