Installation and Setup
Notice
• Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of
improper installation or operation inconsistent with this documentation.
Attaching/Removing the Stand
Attaching the Stand
Notice
• If you place the display face down when you attach the stand, be sure to place a soft cloth under the
display. Failure to do so may result in damage to the display.
For KX-UT113/KX-UT123:
1. Insert the catches of the stand into hooks located in the unit.
2. Gently push the stand in the direction indicated until it locks into place.
The stand will be mounted.
For KX-UT133/KX-UT136/KX-UT248:
1. Insert the catches (
) of the stand into hooks located in the unit.
2. Gently push the stand in the direction indicated until it locks into place.
The stand will be mounted in the high position.
64 Operating Instructions Document Version 2013-03
Installation and Setup
To Next Page
Loading...
