Panasonic KX-UT133

Setting Description Value Range Default
FWD All Forward all incoming calls to a
specified destination.
— —
On/Off Enable or disable the "FWD All"
setting.
On, Off Off
Phone Number Specify the number to forward calls
to when "FWD All" is enabled.
1–32 digits —
FWD Busy Forward incoming calls to a specified
destination when you are on a call.
— —
On/Off Enable or disable the "FWD Busy"
setting.
On, Off Off
Phone Number Specify the number to forward calls
to when "FWD Busy" is enabled.
1–32 digits —
FWD No Ans Forward incoming calls to a specified
destination
if you do not answer after
a specified number of rings.
— —
On/Off Enable or disable the "FWD No
Ans" setting.
On, Off Off
Phone Number Specify the number to forward calls
to when "FWD No Ans" is enabled.
1–32 digits —
Ring count After you specify the phone number
to forward calls to, enter the number
of times the unit will ring before
forwarding the call.
0, 2–20 3
Note
• For details about the FWD/DND settings when
KX-UT113/KX-UT123/KX-UT133/KX-UT136 is
connected to a KX-NS1000 PBX, refer to the documentation of the KX-NS1000.
Document Version 2013-03 Operating Instructions 47
Customising the Telephone