KX-A239AL (PQLV206AL)/KX-A239BX (PQLV206CE)/KX-A239UK (PQLV206E)/KX-A239X
(PQLV206)/KX-A239EJ (PQLV206E)/KX-A420BR
(PSLP1662)
– For KX-UT113NE/KX-UT123NE/KX-UT133NE/KX-UT136NE/KX-UT248NE:
KX-A239CE (PQLV206CE)
– For KX-UT113RU/KX-UT123RU/KX-UT133RU/KX-UT136RU/KX-UT248RU:
KX-A239BX (PQLV206CE)
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near
the unit and is easily accessible.
When connecting a headset
• Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the
connectors.
• Cords used to connect devices to the EHS jack or headset jack must be less than 3 m in length.
Notice
The following headsets can be used with this unit. (Not all operations with the headsets can be
guaranteed.)
• For KX-UT113X/KX-UT123X/KX-UT133X/KX-UT136X
/KX-UT248X:
– EHS headsets (KX-UT133/KX-UT136/KX-UT248 only)
Selected Plantronics
®
-brand headsets
– Bluetooth headsets (KX-UT248 only)
Selected Plantronics-brand headsets
Selected GN Netcom-brand headsets
• For KX-UT113NE/KX-UT123NE/KX-UT133NE/KX-UT136NE/KX-UT248NE:
– EHS headsets (KX-UT133/KX-UT136/KX-UT248 only)
Selected Plantronics-brand headsets
– Bluetooth headsets (KX-UT248 only)
Selected Plantronics-brand headsets
Selected GN Netcom-brand headsets
• For KX-UT113RU/KX-UT123RU/KX-UT133RU/KX-UT136RU/KX-UT248RU:
– EHS headsets (KX-UT133/KX-UT136/KX-UT248 only)
Selected Plantronics-brand headsets
– Bluetooth headsets (KX-UT248 only)
Selected Plantronics-brand headsets
Selected GN Netcom-brand headsets
For up-to-date information about headsets that have been tested with this unit, refer to the following
web sites:
http://panasonic.net/pcc/support/sipphone
When selecting Ethernet cables (not included)
• Use flexible, high-quality, snagless (without strain relief) cables. Do not use cables with coating
that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
68 Operating Instructions Document Version 2013-03
Installation and Setup