Panasonic LP-V15U - Page 75

75
Category Name Code Function Page
Function character
Counter condition CNT Sets the counter conditions. P.90
Counter reset CTR Resets the current counter value to the initial value. P.91
Expiry date/time condition LMT Sets the expiry date/time condition. P.91
Lot condition LTC Sets the condition of “Lot Function” to change
characters depending on date/time and counter
values.
P.92
Lot character string LTS Sets the character string used for “Lot Function”
to change characters depending on date/time and
counter values.
P.93
Bar code / 2D code
Bar code marking data
(ASCII code specied)
BCS Sets character string to be encoded as a bar code
or 2D code by ASCII code. For alphanumeric and
symbols only.
P.94
Bar code marking data
(ASCII code specied)
BBS Sets character string to be encoded as a bar code or
2D code by ASCII code. For alphanumeric, symbols
and specied control codes (EOT/FS/GS/RS/US).
P.95
Bar code marking data
(Shift-JIS code specied)
BRS Sets character string to be encoded as a bar code or
2D code by shift-JIS code. For characters including
control code (specied with 2-bytes alternate codes),
KANA, KANJI and function characters.
P.96
Bar code marking condition BRF Sets the marking condition for bar code and 2D code. P.97
Human readable text BRV Sets the marking condition for the Human Readable
Text to be added to a bar code or 2D code.
P.107
2D code pattern BRP Sets 2D code module marking pattern. P.109
Logo
(Image data)
Logo le CDF Sets the logo le. P.110
VEC logo conditions CDC Sets the marking condition of VEC (work shape
converted for laser marker) logo le.
P.111
DXF logo conditions CDD Sets the marking condition of DXF logo le. P.112
Processing
Processing element FIG Sets the processing element type (straight line, circle,
arc) and coordinates.
P.114
Processing condition LAY Sets X/Y coordinate offset and laser power correction
ratio, etc. for the specied processing condition No.
P.117
Arbitrary point radiation
coordinate and time
PRD Sets arbitrary point radiation X/Y coordinates,
radiation time and laser power correction ratio.
P.118
Arbitrary point radiation
conditions
PRF Sets X/Y coordinate offset and laser power correction
ratio, etc. for the specied arbitrary point radiation
condition.
P.119
ME-LP400V-EX-6