- 107 -- 107 -
5. Recording settings - Main Assist Functions
[Luminance Spot Meter]
Specify any spot on the subject to measure the luminance over a small area.
1 Set [Luminance Spot Meter].
●
[MENU/SET] [ ] [ ] [Luminance Spot Meter] [ON]
2 Select the position where you want to measure the luminance.
●
Press to select and then press [MENU/SET].
● To return the position back to the center, press [Fn1].
Luminance value
■
Measurement Range
Measuring is possible in the range –7% to 109% (IRE).
●
When [Photo Style] is set to [V-Log], this can be measured with Stop units. (Calculated as 0 Stop=42% (IRE))
To Next Page
Loading...
