- 50 -- 50 -
4. Recording Videos - Recording Settings For Video
Recording Settings For Video
This section describes the settings used when video recording.
[System Frequency]
This changes the system frequency of videos that are recorded and played back.
The default setting is for the system frequency to be set to the TV broadcast system for the region where the camera was
bought.
[MENU/SET]
[ ] [ ] Select [System Frequency]
[59.94Hz (NTSC)] System frequency for regions using the NTSC broadcasting system
[50.00Hz (PAL)] System frequency for regions using the PAL broadcasting system
[24.00Hz (CINEMA)] System frequency for producing cinema film
●
After changing the setting, turn the camera off and on.
●
If you record using a system frequency that differs from the broadcasting system of your region, it may not be possible
for you to properly playback videos on your TV.
●
Set the [System Frequency] settings to the same settings during recording and playback.
[Rec. File Format]
Sets the recording file format of videos to be recorded.
[MENU/SET]
[ ] [ ] Select [Rec. File Format]
[MP4] This file format is suitable for playback on PCs.
[MOV] This file format is suitable for image editing.
●
When [System Frequency] is set to [24.00Hz (CINEMA)], it is fixed to [MOV].
●
[Rec. File Format] is not available when using the following functions:
– [HDMI RAW Data Output]
– Streaming function
To Next Page
Loading...
