- 208 -- 208 -
11. Menu Guide - [Playback] menu
[Playback] menu
How to Select an Image(s) in the [Playback] menu
Follow the steps below when the image selection screen is displayed.
●
Images are displayed separately by card slot. To switch the card to display, press [Q.MENU] and select the card slot.
●
You can only select/edit images on one card at a time.
■
When [Single] has been selected
Press to select the image.
SetSet
Press [MENU/SET].
●
If [Set/Cancel] is displayed at the right bottom of the screen, the setting is canceled when [MENU/SET] is pressed
again.
■
When [Multi] has been selected
Press to select the image, and then press [MENU/SET] to set (repeat).
●
The setting is canceled when [MENU/SET] is pressed again.
Set/CancelSet/Cancel
To Next Page
Loading...
