- 86 -- 86 -
5. Recording settings - Metering / Exposure / ISO Sensitivity
ISO Sensitivity
You can set light sensitivity (ISO sensitivity). With the default settings, you can set 100 to 51200 in 1/3 EV increments. This
camera supports Dual Native ISO which enables recording at high sensitivity with reduced noise by switching the base
sensitivity. The base sensitivity can also be fixed as necessary.
1 Press [Fn4].
●
At default setting, [Sensitivity] is assigned to [Fn4].
●
About Fn buttons ( 159 / Fn Buttons)
● You can also set it from the menu screen.
[MENU/SET]
[ ] [ ] Select [Sensitivity]
2 Select ISO sensitivity.
●
Rotate .
2
00
1
00
4
0
3 Confirm your selection.
●
Press [MENU/SET].
To Next Page
Loading...
