Panasonic Lumix DC-BS1H

- 87 -- 87 -
5. Recording settings - Metering / Exposure / ISO Sensitivity
■
Setting Items (ISO Sensitivity)
[AUTO]
The ISO sensitivity is automatically adjusted according to the brightness.
Maximum [6400]*
1
[100] to [51200]
The ISO sensitivity is fixed at the selected value.
●
The available ISO sensitivity range changes according to the setting of [Dual Native
ISO Setting] in the [Video] ([Image Quality]) menu. (
88 / [Dual Native ISO Setting])
●
You can extend the ISO sensitivity range in between a lower limit of [50] and an
upper limit of [204800] by setting [Extended ISO] (
192 / [Extended ISO]) to [ON] in
the [Custom] ([Image Quality]) menu.
*
1
Default setting. The upper limit can be changed with [ISO Sensitivity (video)]. ( 87 / [ISO Sensitivity (video)])
●
When the following functions are being used, the ISO sensitivity that can be set is restricted.
– [High Dynamic] ([Filter Settings]): Down to a lower limit of [400], up to an upper limit of [6400]
– Other than [High Dynamic] ([Filter Settings]): Up to an upper limit of [6400]
– [Cinelike D2] / [Cinelike V2] ([Photo Style]): Down to a lower limit of [200] (The lower limit changes to [100] when
[Extended ISO] is set.)
– [Like709] ([Photo Style]): Down to a lower limit of [100]
– [V-Log] ([Photo Style]): Down to a lower limit of [640], up to an upper limit of [51200] (The lower limit changes to [320]
when [Extended ISO] is set.)
– [Like2100(HLG)] ([Photo Style]): Down to a lower limit of [400].
●
You can change the intervals between ISO sensitivity settings values:
[
] [ ] [ISO Increments] ( 192 / [ISO Increments])
●
You can change the units for sensitivity to dB when recording video:
[
] [ ] [SS/Gain Operation] ( 106 / [SS/Gain Operation])
[ISO Sensitivity (video)]
Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO].
[MENU/SET]
[ ] [ ] Select [ISO Sensitivity (video)]
[ISO Auto Lower Limit Setting]
Sets the lower limit for ISO sensitivity when ISO sensitivity is [AUTO].
●
Set in the range between [100] and [25600].
[ISO Auto Upper Limit Setting]
Sets the upper limit for ISO sensitivity when ISO sensitivity is [AUTO].
●
Set to [AUTO] or in the range between [200] and [51200].