- 120 -- 120 -
6. Special Video Recording - Log Recording
Log Recording
Setting [Photo Style] to [V-Log] enables Log recording. Images finished with rich gradation can be created through post
production processing.
[MENU/SET]
[ ] [ ] [Photo Style] Select [V-Log]
●
Post-production processing is enabled by utilizing LUT (Look-Up Table).
You can download LUT data from the following support site:
https://panasonic.jp/support/global/cs/dsc/download/index3.html
(English only)
ISO Sensitivity When [V-Log] Is Set
The lower limit of available ISO sensitivity is [640] (when [Extended ISO] is set: [320]), and the upper limit is [51200].
●
The range of available ISO sensitivities is also different for [LOW] and [HIGH] in [Dual Native ISO Setting].
●
Reset the exposure if necessary when ISO sensitivity changes.
Exposure When [V-Log] Is Set
The [V-Log] curve characteristics comply with “V-Log/V-Gamut REFERENCE MANUAL Rev.1.0”. When set to [V-Log], the
standard exposure when gray with a reflectance ratio of 18% is imaged is IRE 42%.
8
8
-
7
-
7
-
6
-
6
-
5
-
5
-
4
-
4
-
3
-
3
-
2
-
2
-
1
-
1 00 11 22 33 44 55 66 77
88
（Stop）（Stop）
（10 bit code value）（10 bit code value）
00
6464
128128
192192
256256
320320
384384
448448
512512
576576
640640
704704
768768
832832
896896
960960
10241024
B
A
Reflectance ratio: 18%
Reflectance ratio: 90%
To Next Page
Loading...
