Panasonic Lumix DC-BS1H

- 63 -- 63 -
4. Recording Videos - Time Code
Preparations for Time Code Synchronization
Synchronize the time code default value with an external device that supports time code signal input and output.
When [Count Up] is set to [FREE RUN], you can synchronize the initial value of the time code with an external device.
A
B
C
A
[TC IN/OUT] terminal
B
BNC cable (commercially available)
C
External devices
1 Set [Count Up] to [FREE RUN].
●
[MENU/SET] [ ] [ ] [Time Code] [Count Up] [FREE RUN]
2 Connect the camera and external device with a BNC cable.
●
It is recommended to use a double shielded BNC cable equivalent to 5C-FB.