- 200 -- 200 -
11. Menu Guide - [Custom] menu
[SDI Rec Output]
[SDI Output Resolution]
[1080p] / [1080i] / [1080PsF] / [720p]
[SDI Recording Control]
[ON] /
[OFF]
[Sound Output (SDI)]
[ON] / [OFF]
[SDI Sound Output Gain Adj.]
[0dB] / [-6dB] / [-8dB]
* Default setting specifications vary depending on the country or
area where the camera was purchased.
[SDI MF Assist Output]
[ON] / [OFF]
Sets the SDI output during recording. (
142 / SDI output settings)
●
When [System Frequency] is set to [24.00Hz (CINEMA)], [SDI Output Resolution] is fixed to [1080PsF].
[Fan Mode]
[AUTO1] / [AUTO2] / [NORMAL] / [SLOW]
Sets fan operation.
[AUTO1]: The fan operation switches automatically according to the temperature of the camera. This setting prioritizes
controlling rises in temperature in the camera.
[AUTO2]: The fan operation switches automatically according to the temperature of the camera. This setting prioritizes
reducing fan noise.
[NORMAL]: The fan operates constantly at a standard speed.
[SLOW]: The fan operates constantly at low speed.
[Tally Lamp]
[Front Tally Lamp]
[H] / [L] / [OFF]
[Rear Tally Lamp]
[ON] / [OFF]
This sets the operation of the tally lamp.
To Next Page
Loading...
