- 215 -- 215 -
12. Remote Operations - About Remote Operation
■
Fn Button Assigned with [LAN / Wi-Fi]
You can perform the following operations by pressing the Fn button assigned with [LAN / Wi-Fi] during network connection.
●
About Fn buttons ( 160 / Register Functions to the Fn Buttons)
[Terminate the Connection] Terminates connection.
[Change the Destination] Terminates connection, and allows you to select a different connection.
[Register the Current Destination
to Favorite]
Registers the current connection destination or method so that you can easily connect
with the same connection settings next time.
[Network Address Display (LAN)]
Displays the MAC address and IP address of the camera when connected with a LAN
cable. (
248 / [Network Address Display (LAN)])
[Network Address Display (Wi-Fi)]
Displays the MAC address and IP address during Wi-Fi connection. (
248 /
[Network Address Display (Wi-Fi)])
●
Depending on the function being used or the connection destination, you may not be able to perform some of these
operations.
●
If you turn the camera off without terminating the network connection, when the camera is turned on next, it is
automatically reconnected with the previously connected network connection method.
●
The camera’s Wi-Fi connection, Bluetooth connection, and USB connection cannot be used while supplying power with
PoE+.
●
Do not insert/remove the card or move to an area without any reception while a connection is being made.
●
The camera cannot be used to connect to a public wireless LAN connection.
●
We strongly recommend that you set an encryption to maintain information security.
●
Images may not be completely sent depending on radio wave conditions. If the connection is terminated while importing
images, images with missing parts may be sent.
To Next Page
Loading...
