- 67 -- 67 -
4. Recording Videos - Genlock settings
Compatible reference signal
The compatible reference signal differs depending on the following camera settings.
●
[MENU/SET] [ ] [ ] [HDMI / SDI Connections] [SDI Output]
●
[MENU/SET] [ ] [ ] [SDI Rec Output] [SDI Output Resolution]
(The items that can be set differs depending on the recording frame rate of the [Rec Quality]. (
142 / Set the resolution
during recording when output via SDI))
■
[System Frequency]: [59.94Hz (NTSC)]
Camera setting
Compatible sync signal
BBS Tri-level sync
[SDI Output] OFF
480/59.94i
1080/59.94i
[SDI Output Resolution]
([SDI Output]: [ON])
1080p*
1
1080i
1080PsF
720p 720/59.94p
■
[System Frequency]: [50.00Hz (PAL)]
Camera setting
Compatible sync signal
BBS Tri-level sync
[SDI Output] OFF
576/50.00i
1080/50.00i
[SDI Output Resolution]
([SDI Output]: [ON])
1080p*
2
1080i
1080PsF
720p 720/50.00p
*
1
When the recording frame rate is set to 29.97p of [Rec Quality], there is no compatible tri-level sync signal.
*
2
When the recording frame rate is set to 25.00p of [Rec Quality], there is no compatible tri-level sync signal.
●
Input a sync signal before starting to record. (The syncing cannot be started when the sync signal is input while
recording.)
●
The [Genlock] does not work when the recording frame rate is set to a [Rec Quality] of 23.98p, 24.00p, 47.95p or 48.00p.
To Next Page
Loading...
