Panasonic Lumix DC-G100 User Manual

100
4. Recording mode
Manual Exposure Mode
In [ ] mode (Manual Exposure mode), you can take pictures by manually
setting the aperture value and shutter speed.
In default settings, the ISO sensitivity is set to [AUTO].
As a result, the ISO sensitivity will be adjusted according to the aperture
value and shutter speed.
Exposure compensation can also be used when ISO sensitivity is set to
[AUTO].
1
Set the mode dial to [ ].
2
Set the aperture value and
shutter speed.
● Rotate to set the aperture value,
and
to set the shutter speed.
Aperture value
Shutter speed
3
Start recording.
• If the correct exposure is not achieved
when the shutter button is pressed
halfway, the aperture value and the
shutter speed blink red.

Panasonic Lumix DC-G100 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3MP
Image Processor	Venus Engine
Built-in Flash	Yes
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 270 shots (CIPA)
Dimensions	115.6 x 82.5 x 54.2 mm
Sensor Size	17.3 x 13.0 mm (Four Thirds)
ISO Sensitivity	200-25600 (expandable to 100-25600)
Autofocus System	Contrast AF
Shutter Speed	1/16000 to 60 sec
Continuous Shooting	10 fps
Video Recording	4K/30p
Viewfinder	Electronic, 3.68 million dots
LCD Screen	3.0-inch, 1.84 million dots, free-angle touch screen
Battery	DMW-BLG10
Weight	Approximately 412 g (including battery and SD card)
Image Stabilization	5-Axis Hybrid I.S. (available in video recording)