465
16. Materials
Troubleshooting
First, try out the following procedures (465 to 475).
If the problem is not resolved, it may be improved by selecting
[Reset] (69) on the [Setup] menu.
Power, Battery
The camera turns off automatically.
• [Economy] is enabled. (37)
The battery becomes flat too quickly.
• When [4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster. Set
these settings only when recording.
• When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Economy] (37).
Recording
Recording stops before finishing.
Cannot record.
Cannot use some functions.
• In high ambient temperatures or if the camera is used for continuous recording, the
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [
] is displayed,
recording will be stopped, and the following functions will not be available for a
time. Wait until the camera cools down.
– [4K PHOTO]
– [Post Focus]
– Video recording
To Next Page
Loading...
