70
3. Basic Operations
Recording Using Touch Functions
Touch AF/Touch Shutter
Touch functions allow you to focus on the point that you touch, release the
shutter, etc.
1
Touch [ ].
2
Touch the icon.
● The icon switches each time you
touch it.
Touch AF Focus on the Touched Position.
Touch Shutter Record with focus on the point touched.
OFF —
3
(When set to anything other
than OFF)
Touch the subject.
• When the Touch Shutter fails, the AF area first turns red and then
disappears.
• Refer to “Operations on the AF area movement screen” on page 134 for
information about operations to move the AF area.
• It is also possible to optimize the focus and brightness on the touched
position:
[
] [ ] [Touch Settings] [Touch AF] [AF+AE] (144)
To Next Page
Loading...
