420
14. Wi-Fi/Bluetooth
Wi-Fi Connections
When [New Connection] has been
selected in [Wi-Fi Function] in [Wi-Fi] of
the [Setup] menu, select the connection
method from either [Via Network] or
[Direct] to connect.
On the other hand, when you use [Select
a destination from History] or [Select a
destination from Favorite], the camera
connects to the selected device with the
previously-used settings.
[Via Network]
Connect the camera and destination device through the wireless access
point.
Select the method for connecting
to a wireless access point.
Settings: [WPS (Push-Button)]/[WPS (PIN
code)]/[From List] (421)
• After selecting [Via Network] once, the camera will connect to the
previously-used wireless access point.
To change the wireless access point used for connection, press [DISP.] and
change the connection destination.
• Check the operating instructions and settings of the wireless access point.
To Next Page
Loading...
