449
16. Materials
Using Optional Accessories
• For information on the tripod grip, refer to page 72.
External Flash (optional)
After attaching the flash (DMW-FL580L, DMW-FL360L,
DMW-FL200L: optional), the effective range will be
increased when compared to the camera’s built-in
flash.
1
Close the built-in flash and set the Camera on/off switch
to [OFF].
2
Attach the external flash to the hot shoe and then turn on
the camera and the external flash.
• Refer to (238) for changing the settings for external flashes on the camera.
• Refer to (236) about the settings for the wireless flash.
Removing the Hot Shoe Cover
Before attaching the Flash (optional), remove the hot shoe cover.
Refer to the operating instructions for the Flash for details about how to
attach it.
Remove the hot shoe cover by pulling it in the direction
indicated by arrow
while pressing it in the direction
indicated by arrow
.
To Next Page
Loading...
