Panasonic Lumix DC-G100 User Manual

462
16. Materials
Message Displays
Meanings of main messages displayed on the camera screen, and
response methods.

Card
[Memory Card Error]/[Format this card?]
• It is a format that cannot be used with the camera.
Either insert another card, or back up any necessary data before formatting. (40)
[Memory Card Error]/[This memory card cannot be used]
• Use a card compatible with the camera. (24)
[Insert SD card again]/[Try another card]
• Unable to access the card. Reinsert the card.
• Insert a different card.
[Read Error]/[Write Error]/[Please check the card]
• Failure to read or write data.
Turn off the camera, reinsert the card, and then turn it on again.
• The card may be broken.
• Insert a different card.
[Recording was cancelled due to the limitation of the writing speed of
the card]
• Insufficient card write speed. Use a card of a supported Speed Class. (24)
• If the recording stops even when you are using a card that meets the specified
Speed Class rating, the data writing speed of the card is getting slow. We
recommend backing up data, and formatting (40).

Panasonic Lumix DC-G100 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3MP
Image Processor	Venus Engine
Built-in Flash	Yes
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 270 shots (CIPA)
Dimensions	115.6 x 82.5 x 54.2 mm
Sensor Size	17.3 x 13.0 mm (Four Thirds)
ISO Sensitivity	200-25600 (expandable to 100-25600)
Autofocus System	Contrast AF
Shutter Speed	1/16000 to 60 sec
Continuous Shooting	10 fps
Video Recording	4K/30p
Viewfinder	Electronic, 3.68 million dots
LCD Screen	3.0-inch, 1.84 million dots, free-angle touch screen
Battery	DMW-BLG10
Weight	Approximately 412 g (including battery and SD card)
Image Stabilization	5-Axis Hybrid I.S. (available in video recording)