Panasonic Lumix DC-G100 User Manual

144
6. Focus/Zoom
Moving the AF Area by Touch
You can move the AF area to a touched position on the monitor.
Optimizing the focus and brightness to the touched
position
Set [Touch AF].
● [ ] [ ] [Touch Settings]
[Touch AF]
[AF]
This focuses on the touched
subject.
[AF+AE]
This focuses on and adjusts
brightness for the touched subject.
• The default setting is [AF].

Focus on the Touched Position ([AF])
Touch the subject.
• The AF area moves to the touched position.
Size of the AF area can be set when AF Mode is in the following cases:
– [ ] ([Face/Eye Detection]), [ ] ([1-Area]), [ ] ([Pinpoint])
– [
] etc. ([Vertical Pattern], [Horizontal Pattern] or [Central Pattern] of Custom
Multi)
Pinch out/pinch in to change the AF area size.
• The first touch of [Reset] returns the AF area position to the center.
The second touch returns the size of the AF area to the default.
• With [
], operations will be on a magnified screen. (143)
Touch [Set].
• In [ ], touch [Exit].

Panasonic Lumix DC-G100 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3MP
Image Processor	Venus Engine
Built-in Flash	Yes
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 270 shots (CIPA)
Dimensions	115.6 x 82.5 x 54.2 mm
Sensor Size	17.3 x 13.0 mm (Four Thirds)
ISO Sensitivity	200-25600 (expandable to 100-25600)
Autofocus System	Contrast AF
Shutter Speed	1/16000 to 60 sec
Continuous Shooting	10 fps
Video Recording	4K/30p
Viewfinder	Electronic, 3.68 million dots
LCD Screen	3.0-inch, 1.84 million dots, free-angle touch screen
Battery	DMW-BLG10
Weight	Approximately 412 g (including battery and SD card)
Image Stabilization	5-Axis Hybrid I.S. (available in video recording)