145
6. Focus/Zoom
Focus on and Adjust Brightness for the Touched Position
([AF+AE])
Touch the subject to which you wish to
adjust the brightness.
• At the touched position, an AF area
that works in the same way as [
] is
displayed.
This places a point to adjust brightness at
the center of the AF area.
• [Metering Mode] is set to [
], which is
used exclusively for the [Touch AE].
Pinch out/pinch in to change the AF area size.
• The first touch of [Reset] returns the AF area position to the center. The second
touch returns the size of the AF area to the default.
Touch [Set].
• The [AF+AE] area setting is canceled if you touch [ ] (when [ ] is set:
[
]) on the recording screen.
• When the following functions are being used, [AF+AE] is not available:
– [Digital Zoom] (DC-G100 only)
– [4K Live Cropping]
To Next Page
Loading...
