Panasonic Lumix DC-G100 User Manual

170
7. Drive/Shutter/Image Stabilizer
Selecting Pictures from a 4K Burst File
You can select pictures from the 4K burst files and save them.
• When continuing to select pictures from the Auto Review after recording 4K photos,
start the operation from either Step
2 or 3.
1
Select a 4K burst file on the
playback screen. (272)
● Select an image with the [ ]
icon and then press
.
● You can also perform the same
operation by touching [
].
• If the images were recorded with [4K Pre-
Burst], proceed to Step
3.
2
Roughly select the scene.
● Drag the slide bar .
• For information about how to use the
picture selection slide view screen, refer
to page 172.
• If the images were recorded with [4K
Burst] or [4K Burst(S/S)], touching
[
] allows you to select the scene in
the 4K burst playback screen. (174)
Picture selection slide view
screen
3
Select the frame to save.
● Drag the picture selection slide
view
.
● You can also perform the same
operation by pressing
.
• To continuously rewind or forward frame-
by-frame, touch and hold [
]/[ ].

Panasonic Lumix DC-G100 Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Effective Pixels	20.3MP
Image Processor	Venus Engine
Built-in Flash	Yes
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 270 shots (CIPA)
Dimensions	115.6 x 82.5 x 54.2 mm
Sensor Size	17.3 x 13.0 mm (Four Thirds)
ISO Sensitivity	200-25600 (expandable to 100-25600)
Autofocus System	Contrast AF
Shutter Speed	1/16000 to 60 sec
Continuous Shooting	10 fps
Video Recording	4K/30p
Viewfinder	Electronic, 3.68 million dots
LCD Screen	3.0-inch, 1.84 million dots, free-angle touch screen
Battery	DMW-BLG10
Weight	Approximately 412 g (including battery and SD card)
Image Stabilization	5-Axis Hybrid I.S. (available in video recording)