344
13. Menu Guide
[Custom] menu [Monitor / Display]
[Peaking]
[ON]/[OFF]
[SET] [Detect Level]
[Display Color]
During MF operation, in-focus portions (portions on the
screen with clear outlines) are highlighted with color.
• When [Detect Level] in [SET] is set to [HIGH], portions
to be highlighted are reduced, allowing you to achieve a
more precise focus.
• Changing the [Detect Level] setting also changes the
[Display Color] setting as follows.
[Detect Level] [HIGH] [LOW]
[Display Color]
(Light blue) (Blue)
(Yellow) (Orange)
(Yellow
Green)
(Green)
(Pink) (Red)
(White) (Gray)
• Each time [
] in [ ] is touched, the setting is
switched in order of [
] ([Detect Level]: [LOW]) →
[
] ([Detect Level]: [HIGH]) → [OFF].
• When [Rough Monochrome] of [
] mode is being used,
[Peaking] is not available.
• When [Live View Boost] is being used, [Peaking] is not
available.
To Next Page
Loading...
