Drive / Shutter / Image Stabilizer – Taking Burst Pictures
219
• It may take a while to save burst pictures.
If you continue to take burst pictures while saving is in progress, the maximum
number of frames recordable will be reduced.
When taking burst pictures, we recommend using a high-speed card.
• For information about the high temperature display (ÎFor information
about the high temperature display: 130)
Notes on SH burst recording
• [AFC] focus mode switches to [AFS].
• [Shutter Type] is fixed to [ELEC.].
• There are limits on the shutter speed you can set during SH burst recording.
– [SH75]: To a minimum of 1/80
– [SH60]: To a minimum of 1/60
– [SH20]: To a minimum of 1/20
• The aperture will be fixed during burst recording.
• [Auto Review] is not available.
• The images recorded will be saved as a set of burst group pictures. (ÎGroup
Images: 492)
To Next Page
Loading...
