Metering / Exposure / ISO Sensitivity – Program AE Mode
272
Program Shift
You can change the shutter speed and aperture value combination set
automatically by the camera while maintaining the same exposure.
With this, you can, for example, make the background more defocused by
decreasing the aperture value or capture a moving subject more
dynamically by slowing the shutter speed.
1
Press the shutter button halfway.
• This displays the aperture value and shutter speed value on the recording
screen. (Approx. 10 seconds)
2
Rotate or while the values are displayed.
• This displays the Program Shift icon (C) on the recording screen.
3
Start recording.
Canceling Program Shift
•
Set the camera on/off switch to [OFF].
• Rotate or until the Program Shift icon disappears.
F5.630
(C)
To Next Page
Loading...
