Special Video Recording – Log Recording
433
[V-Log View Assist]
When [Photo Style] is set to [V-Log], the recording screen and images
output via HDMI will darken. Using [V-Log View Assist] means you can
show images with LUT data applied on the monitor/viewfinder and output
them via HDMI.
¨ [ ] ¨ [ ] ¨ Select [V-Log View Assist]
[Read LUT File]
Reads LUT data from the card.
[LUT Select]
Selects the LUT data to be applied from among the preset ([Vlog_709]) and registered
LUT data.
[LUT View Assist (Monitor)]
Displays the images with LUT data applied on the monitor/viewfinder of the camera.
[LUT View Assist (HDMI)]
Applies LUT data to images output over HDMI.
• When applying the LUT data, [LUT] is displayed on the recording screen.
• Up to 4 LUT data files can be registered.
To Next Page
Loading...
