Wi-Fi / Bluetooth – Sending Images from the Camera
665
[Printer]
You can send images to a PictBridge (wireless LAN)
*
-supported printer
connected by Wi-Fi for printing.
* DPS over IP standard-compliant
1
Select the method for sending images on the camera.
≥ ¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨ [Wi-Fi Function] ¨ [New
Connection] ¨ [Send Images Stored in the Camera]
2
Set the destination to [Printer].
3
Connect the camera to a printer by Wi-Fi.
≥Select [Via Network] (Î[Via Network]: 667) or [Direct] (Î[Direct]:
671), and then connect.
4
Select the destination printer.
5
Select and print images.
• The procedure for selecting images is the same as the one for when the USB
connection cable is connected. (ÎPrinting: 696)
• To terminate the connection, press [ ].
• For details about PictBridge (wireless LAN-compatible) printers, contact their
manufacturers.
• When [Auto Transfer] in [Bluetooth] is set to [ON], [Wi-Fi Function] is not
available.
To Next Page
Loading...
