Video Settings – Main Assist Functions
406
[Luminance Spot Meter]
Specify any spot on the subject to measure the luminance over a small
area.
1
Set [Luminance Spot Meter].
≥ ¨ [ ] ¨ [ ] ¨ [Luminance Spot Meter] ¨ [ON]
2
Select the position where you want to measure the
luminance.
≥Press 3421 to select and then press or .
•
Positions can be moved to the diagonal directions using the joystick.
• You can also change the position by dragging the frame on the recording
screen.
• To return the position back to the center, press [DISP.].
(M) Luminance value
65%
65%
(M)
To Next Page
Loading...
