Wi-Fi / Bluetooth – Wi-Fi Connections
671
[Direct]
Directly connect the camera and the destination device.
Select the method for connecting with the destination device.
[WPS Connection]
[WPS (Push-Button)]: Press the WPS button on the destination device to connect.
• On the camera, press [DISP.] to extend the connection wait time.
[WPS (PIN code)]: Enter the PIN code into the camera, and connect.
[Manual Connection]
Search for the camera on the destination device to connect.
1 Select the network authentication.
[WPA3]/[WPA3/WPA2]
• If [Wi-Fi Password] in [Wi-Fi Setup] is [OFF], this is not displayed if the
connected device is [Smartphone].
2 Enter the SSID and password displayed on the camera into the device.
• If [Wi-Fi Password] in [Wi-Fi Setup] is [OFF], the password is not displayed if
the connected device is [Smartphone].
Select the SSID to establish a connection. (ÎConnecting to a Smartphone
([Wi-Fi connection]): 634)
To Next Page
Loading...
